SEK Surebond SB-6000 Wet-Look Water Based Sealer Gallon
|Delivery time:||Please allow 2-4 weeks for pick up, Shipping is unavailable for this item|
SB-6000 Wet Look Sealer
- Deeply Enhances Surface Tone with Satin Finish
- Protects Surface by Resisting Water, Stains & Salt
- Promotes Easier Cleaning & Maintenance
- Low VOC Formula
- Breathable, Immediate Application Water Based Sealer
SB-6000 Wet Look Sealer is a proprietary water-based, modified latex, exterior quality sealer. SB-6000 will seal and enhance the beauty of new and old surfaces with a luxurious, wet look sheen with pronounced color enhancement and satin finish. It is breathable and will not trap naturally occurring efflorescence, allowing it to be applied immediately after new paving stones are installed. SB-6000 improves surface durability and freeze-thaw resistance while protecting the surface from salt, acid and staining. It exceeds all VOC, EPA and OSHA standards. SB-6000 Wet Look Sealer has the consistency of water and is milky white when applied; it dries to a clear, wet look on the surface of the pavement. SB-6000 Wet Look sealer can be used both inside and outside on old and new pavements. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
Ideal for concrete and clay pavers, flat and stamped concrete, or natural and manufactured stone. Also suitable for masonry, retaining walls, porous or unglazed tile and terrazzo. Not recommended for marble, granite or ceramic tile.
A test area is always recommended to determine product suitability and compatibility with your specific surface before use and also if desired results are achievable. Due to the inherent variabilitity of natural stone and clay products, long term performance may vary. Please consult with us prior to sealing if there are concerns.
|Pavers & Other Hardscape Surfaces||100 – 200||9.3 – 18.6|
|Concrete||150 – 250||13.9 – 25.2|
|Retaining Walls & Other Vertical Surfaces||100 – 200||9.3 – 18.6|
Per gallon. Two coats of SB-6000 are recommended. Allow first coat to dry before applying second coat. Second coat coverage is estimated between 200-300 sq. ft. per gallon (18.6-27.9 M/G). Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature and humidity.