SEK Surebond SB-10 Paver Bond Adhesive, 28oz.

$10.99
Availability: In stock
Delivery time: Available for Pick Up only, does not ship UPS

 

SB-10 Paver Bond Adhesive

High Strength Structural Grade Hardscape Adhesive

NEW & IMPROVED FORMULA FOR 2020!
FIELD PROVEN PERFORMER USED IN COMMERCIAL & RESIDENTIAL PROJECTS FOR OVER 25 YEARS
  • Higher Strength Adhesion
  • Faster Setup
  • Rigid & Durable
  • Can Be Applied on Wet & Frozen Block
  • VOC Compliant

A field proven performer, SB-10 Paver Bond is a fast set up, quick curing, high strength, structural grade adhesive. It will adhere well in extreme conditions such as temperatures ranging from 0° – 100°F, and frozen and/or damp substrates. SB-10’s superior durability will withstand extreme wear and tear including heavy vehicular traffic. It helps to level and shim and can be applied easily with a standard caulking gun.

Uses

Ideal for Caps, Steps, Columns, Seat Walls, Retaining Walls, Grill Surrounds, Outdoor Kitchens, Paver Installations, Coping Systems and any exterior hardscape application where a high strength bond is beneficial.

Suitable Surfaces

Suitable for concrete pavers & block,  clay pavers, coping systems, masonry and brick, natural and manufactured stone, slate and porcelain tile. Also bonds to other building materials such as treated lumber, aluminum foil back sheathing, gypsum, fiberglass and composite decking materials.

Coverage*

BEAD SIZE 10.3 FL. OZ. 28.0 FL. OZ.
1/8" bead 103 linear feet 288 linear feet
1/4" bead 26 linear feet 86 linear feet
3/8" bead 13.5 linear feet 38 linear feet

 

PREPARATION

Before application, inspect pavers or stones to ensure they are smooth, flat and of the same height. Substrate must be structurally sound with no spalling, cracking or scaling. For ultimate adhesion, surface should be clean, free from dirt, oil and grease, excessive water, ice or any other material. If cleaning is required, prepare surface with SureClean Deep Penetrating Multi-Use Cleaner. Rinse thoroughly and let dry before applying SB-10 Paver Bond. To ensure final assembly, dry fit all pieces prior to applying SB-10 Paver Bond. Proper drainage must be provided so that water does not drain into and collect in adhered areas.

APPLICATION INFORMATION

Cut nozzle to desired size and puncture inner seal. Apply a 1/8” to 3/8” bead of SB-10 Paver Bond using a caulking gun. On most applications, apply SB-10 Paver Bond in a ‘S’ shape. Where there is a potential for moisture infiltration, apply multiple lines of SB-10 Paver Bond parallel with the drainage flow. Positioning and aligning should be done within 10-15 minutes of application.

DRY TIME

SB-10 Paver Bond starts to set within 10-15 minutes. Full cure is achieved between 2 and 7 days depending on environmental conditions. At full cure, SB-10 Paver Bond is non-flammable and non-toxic.

CLEAN UP

Use mineral spirits or chlorinated solvents following manufacturer’s instructions and precautionary information.

0 stars based on 0 reviews