General Information
What is Reconstituted Stone?
Reconstituted Stone - is
manufactured from the highest grade materials and will last
for years. It is hand crafted, with
moulds taken from original natural flagstones for an
authentic appearance. Bradstone products
are a constant thickness and is therefore
easy to lay. The more traditional styles,
such as Old Town and Old Riven, are
particularly suited to the classic style
of British country gardens.
Colors - shades are
subtle and subject to slight variations, especially
highlighted in
the weathered shades where many products
are hand made to ensure a completely
random, natural look. Colors will appear
different depending upon the prevailing
conditions such as sunlight, heavy shade
or rain, therefore it is advisable to check
the color and appearance of the actual
product samples in dry daylight conditions
before purchase. Where possible, products
should also be selected from the same
production batch. Reconstructed stone
will weather over time in a similar way to
natural stone.
Paving Color Swatches
Products are manufactured at factories
located in different areas of the United States,
therefore significant variation in color
and texture can occur when compared with the
colors shown in the swatches. Please note
that some products have a multi-color mix
where the manufacturing process means
that different color percentages are likely
between packs. For the best overall
effect we advise that pavers are chosen from
three to five different packs and from
vertical columns rather than horizontal rows.
Multi-colored products are produced
randomly, therefore color proportions in different
pavers may vary widely.
Application/Suitability
Unless otherwise stated, the Bradstone
materials featured in this catalog are
intended for use for domestic landscape
projects. Bradstone decorative paving is not
suitable for driveways. The manufacturer
cannot accept any liability where products
have been used for any inappropriate
purpose. In the unlikely event of products
reaching you in a less than satisfactory
condition, please contact your local
distributor or Bradstone directly,
allowing time for the rejected product to be
replaced. If a complaint is raised after
laying the product, Bradstone cannot accept
responsibility for any defect. De-icing
salts should not be used on the Bradstone
paving.
Sizes & Joint Widths
All dimensions quoted in this catalog are
nominal and are for guidance only. Actual
sizes will vary, particularly on the
products designed to replicate natural stone which
have features such as riven profiles and
fettled edges. Where space is critical,
Bradstone recommends dry laying the
product to check area required. The sizes and
quantities given in the paving tables on
page 28 usually allow a nominal 1/2" joint
width. When laying random paving and
circles, and in particular Wetherdale Paving and
Old Town Flagstone Paving with their
fettled edges, joint widths will depend on the
paving type and laying pattern chosen and
will be variable - from approximately 12" to
1 ".
Handling
Standard manual handling techniques
should be adopted when handling products. Some products in the
Bradstone range are heavy or an awkward shape to lift and it
is recommended that suitable lifting equipment is used for
these products. Always wear gloves and safety footwear when
handling product. If product is to be cut always wear safety
goggles and when using a high speed cutter also wear suitable
respiratory protection, such as a dust mask. Before removing
wrapping or banding, ensure that the products are on level
ground or retained in some way to prevent fall over. When
removing shrink wrapping and banding use the appropriate
cutting tools; also it is recommended that safety goggles are
worn. Product should always be handled with care as breakages,
chipping and other damage may result from mishandling. Minor
scuffing can occur due to movement in transit and will
generally disappear in time. If in doubt do not install the
product. Consult your Bradstone Representative.
